TOLL FREE 888-869-2424

KCM HIGH SPEED WEDGE TYPE POWER CHUCKS
3-JAW LARGE THRU HOLE CHUCKS
1.5MM X 60 DEGREE SERRATIONS - A TYPE MOUNTS

               
 

	KCA 5-6-46-3	KCA 6-8-52-3	KCA 6-10-75-3	KCA 8-10-75-3	KCA 8-12-85-3	KCA 8-15-120-3	KCA 11-15-120-3	KCA 11-18-120-3
A	6.50	8.25	10	10	12	15	15	18
B	2.06	2.62	2.62	3.37	3.37	3.37	4.62	4.62
C	A5	A6	A6	A8	A8	A8	A11	A11
D	0.86	0.68	1.20	0.98	1.18	2.36	1.37	1.37
F	M55xP1.5	M60xP1.5	M85xP2.0	M85xP2.0	M93xP2.0	M130xP2.0	M130xP2.0	M130xP2.0
H	3.54	4.09	5.05	4.84	5.31	7.48	6.49	6.49
J	6-M10	6-M12	6-M16	6-M16	6-M16	6-M20	6-M20	6-M20
M	1.81	2.04	2.95	2.95	3.34	4.72	4.72	4.72
N MAX	1.27	1.55	2.04	2.04	2.36	3.12	3.12	3.12
N MIN	1.16	1.40	1.87	1.87	2.18	2.90	2.90	2.90
P	1.25	1.65	1.73	1.73	2.12	2.55	2.55	2.55
Q	1.77	2.36	3.14	3.14	3.34	3.93	3.93	4.72
R	0.98	0.98	1.18	1.18	1.77	2.36	2.36	2.95
T	6-M8deep12	6-M8deep15	6-M12deep18	6-M12deep18	6-M16deep20	6-M16deep25	6-M16deep25	6-M16deep25

Model	KCA 5-6-46-3	KCA 6-8-52-3	KCA 6-10-75-3	KCA 8-10-75-3	KCA 8-12-85-3	KCA 8-15-120-3	KCA 11-15-120-3	KCA 11-18-120-3
Thru-hole	1.81	2.04	2.95	2.95	3.34	4.72	4.72	4.72
Stroke of Jaws (on Dia.)	0.22	0.29	0.35	0.35	0.35	0.44	0.44	0.44
Stroke of Piston	0.51	0.66	0.78	0.78	0.78	0.98	0.98	0.98
Chucking Diameter Max	5.84	7.44	9.00	9.00	10.80	13.50	13.50	16.19
Chucking Diameter Min	0.47	0.82	1.04	1.04	1.96	2.95	2.95	2.95
Gripping Force lbs.	10,560	17,600	24,200	24,200	30,800	39,600	39,600	39,600
Max Draw Pull lbs.	4,950	6,000	9,600	9,600	11,200	15,400	15,400	15,400
Max RPM	6,000	5,000	4,000	4,000	3,200	2,500	2,500	2,000
Weight lbs.	29	52	85	85	154	290	274	397

KALAMAZOO CHUCK INDEX
HOME